rory18 wrote:boxhead55 wrote:Can someone repeat the code for the
Auto temp sensor
I tried looking but could not find it.
And also where do you go to put the code in.
Boxhead, I believe this is the one for Hilux.
TXD: 07E121D9
RXF: 032180000000
RXD: 1810
MTH: 0003004DFE70
NAM: TF6
And if you are using a scan gauge this is how you enter it,
• Start from the HOME screen, press MORE>MORE>MORE>XGAUGE
• Then in the top right, select the number of the X-Gauge memory you want to
use (0 to 24)
• Next select <EDIT , this will take you to the TXD screen
• Use the + and - buttons to enter each character at the underscore position, the
º button at the top right will move to the next character space.
• Enter 07E121D9 into the TXD screen and press OK>
• Enter 032180000000 in the RXF screen and press OK>
• Enter 1810 in the RXD screen and press OK>
• Enter 0003004DFE70 in the MTH screen and press OK>
It should work but no guarantees.
how_goods_beer wrote:I've got a 2008 Diesel 4 Speed Auto - does anyone know of anything that will display Transmission Temp for that model? (website says XGauge not supported for older than 2009)
GeeBung wrote:Can anyone with an 2013 MY14 confirm that a scangauge II works on thier vehicle. The scangauge australia site says that it's not compatable with d4d after 2006.
Would really like to get one or somethingsimilar to be able to clear codes if I am in a remote area.
packeteer wrote:fwiw, the ECUshop monster gauge can do more than the Scangauge and it works on 05+06
apSlain wrote:Hi all,
Looking to purchase a ScanGauge for my 'Lux but I'm unsure of the compatibility. The vehicle's date of compliance is 09/2006; date of manufacture is 08/2006. Going by the vehicle compatibility chart, I should be in the clear, correct?
Users browsing this forum: No registered users and 32 guests