Alex's WMD

[WETDREAM]

looks good jack ..

[Jack S]

Yes the covers really came up nice and like them alot and the mats looks heaps better than the old ones i use to have in them...

[Jack S]

Well guys a few little things happened today and yesterday, nothing massive (ill leave that for a few more weeks ) but mods none the less...

Yesterday: I fitted the water bladder, very well built and suprisingly heavy for what it was when i pulled it out of box. Fitted that behind the seat and filled it up, no leaks. Made a better post and little write up on the specific thread for it, so wont worry about repeating myself here, but i added the link if anyone wanted a quick look ( viewtopic.php?f=8&t=9162&start=100 )




Today: I fitted my custom rocker switches, as shown in picture there is one for the light bar, spotties and reverse/work light. I got the 20" light bar to go when when i get new bar, reverse/spotties are at a mates place ready to be wired up and spotties will be ordered when i am ready (will go a set of HID genesis).
I cut a section out of the pannel and installed there '3 gang plate', used this as i thought it would look and work better, which it definately did!

[hillyz]

Nice! Love the custom switches, definitely makes things a little cooler when its in your own words.

[Quinny34]

LOL... Love the Bunny Burner Switch....

[Jack S]

Yea with the 'bunny burners', you can also get them with a pic of a rabbit of them too.
But anyone looking for switches, Ian from custom rockers is really good to deal with, and they have a mountain of switches avaliable, of all different applications, they arent the cheapest swicthes but the quality is awesome. These switches are the same as the ARB ones....

[Luxasaurus]

Youve got my mate wanting them now

Just realised, Ive seen you because i laughed at the "China" plates whilst in lithgow on the Easter longweekend i think

[shanno]

Just realised, Ive seen you because i laughed at the "China" plates whilst in lithgow on the Easter longweekend i think

[Jack S]

Na wasnt around lithgow than man, but all the chances you have seen me around somewhere.....
But why laugh? got something wrong with with my plates

[Luxasaurus]

haha nothing wrong with them, I had to laugh at it , Jap made truck with a China plate

Ive seen you floating around before, Unsure where it has. Hopefully you will notice me around when i get my Newhilux sticker.

She a good looking rig mate

[Jack S]

Yea they are strange plates but it points me out when the mates pass me, plus being my nic name it's kind of fitting....
Yea I will keep an eye out for you now man, now I know that your on the site and everything....

Cheers for the comment, got a few big plans happening

[Luxasaurus]

haha as do we all

Shall fire off the bunny burners if i see you at night . Will be easier when i get my new plates and the club sticker

[Jack S]

, you can flash the bunny burners, ill flash the light bar. As i wont have the spotties for a little while, they are down on the list at the moment.
But yes, shall keep an eye out for you man

[Jack S]

Well ill give a quick update now, and a full one middle to end of next week!

After some dramas with the REKON swaybar relocators, i finally got them fitted with my mate 'mr angle grinder', i had to cut i notch out of the drivers side radiator support bracket:



From the angle is still looks like it touches but there is about 5mm-8mm clearance now, where as before it was touching and thats what was stopping the installation.


End result:


Once again whats in the boxs?


No we arent playing this game again so dont worry

Box 1: Depo Angel Headlight


Box 2: HID Conversion, 35w low and 55w high


Box 3: mmmmm, will have to wait and find out

[helmut79]

Newpro Tech HID are awesome Jack have them in my Lux

[danmcccc]

xrox love it haha

[Jack S]

xrox love it haha

XROX bar??
Where

[KTM525EXC]

looking foward to your oppinion on the hid projector combo jack,

[helmut79]

xrox love it haha

XROX bar??
Where

In the other Box Jack

[kyle300exc]

Yeh Jack wheres your bloody xrox bar????